The 14mm GRAV® Male Octobowl is compatible with any 14mm female joint. Its glass screen is designed to catch ash and tar and hold plant matter in place, and an arm on the side of the bowl allows for safe handling. The Octobowl's substantial capacity is designed for use with larger water pipes and upright bubblers.
The 14mm GRAV® Funnel Bowl is compatible with any 14mm female joint and features a glass maria around its stem for safe handling. The funnel bowl's substantial capacity is designed for use with larger water pipes and upright bubblers.
The GRAV® Dugout is the epitome of convenience. You have your pipe, grinder, and storage all in one handheld, pocket sized device. Twist the lid to access the two chambers: the smaller contains a spring-loaded aluminum taster with teeth that make grinding and loading the bowl effortless, and the larger is a storage area for your flower, complete with polycarbonate windows for a quick supply check. The bottom of the Dugout has a recessed pin you can use to clear and clean your bowl after smoking. The piece is made on CNC aluminum with an engraved GRAV logo and comes with a zip-up carrying case, complete with a clip you can attach to a lanyard or keychain.
The 14mm GRAV® Cup Bowl is compatible with any 14mm female joint and features a glass maria around its stem for safe handling. The cup bowl's limited capacity is designed for use with smaller water pipes and Helix™ pipes.
The 14mm GRAV® Triple Pinch Bowl is compatible with any 14mm female joint and features a glass arm on the side of the bowl for safe handling. Its restriction is formed by three glass pinches designed to catch ash and keep plant matter in place. The pinch bowl's limited capacity is designed for use with smaller water pipes and Helix™ pipes.
The Helix™ Pre-Mix Chamber is 3" long and made on 19mm tubing. Its Venturi chamber features three air intake holes that cool and spin smoke before it enters a water pipe. The pre-mix chamber is designed for use with 14mm female-jointed water pipes and 14mm male accessories.
The GRAV® charcoal filter is a 2" long chamber filled with activated charcoal. The charcoal pulls tar and odors out of smoke, leaving a cleaner airflow. Its 14mm male and female joints fit most GRAV® water pipes and accessories, and it comes with a 14mm glass plug and plastic joint clamp to keep the charcoal fresh between uses.
The 14mm Helix™ Taster® Bowl is compatible with any 14mm female joint and features dual roll stops on either side of the bowl for safe handling. The Helix™ Bowl's limited capacity is designed for use with smaller water pipes and Helix™ pipes.
The 14mm GRAV® Fission Downstem is compatible with any 14mm beaker or straight-based water pipe with an angled joint. Its fission holes diffuse smoke through water and are made with a tungsten rod while the glass is hot, creating smooth edges that reduce clogging. This downstem measures 3.3" in length.
The GRAV® Phoenix Ash Catcher is 5" tall and made on 38mm tubing. Ice can be added through its removable glass lid. Its 90° angled arm is designed for use with a 14mm female joint on any straight-based water pipe. The phoenix ash catcher comes ready to use with a 14mm funnel bowl and works best with approximately 1.5" of water.
The Upline® Ash Catcher is 5" tall and made on 38mm tubing. Its ladder perc restrictions create bubbler chambers that wash and filter smoke. Its showerhead downstem diffuses smoke through water and is fixed inside the ash catcher to prevent damage. Its 90° angled arm is designed for use with a 14mm female joint on any straight-based water pipe. The Upline® Ash Catcher comes ready to use with a 14mm Octobowl and works best with approximately 2" of water.
The 14mm GRAV® Fission Downstem is compatible with any 14mm beaker or straight-based water pipe with an angled joint. Its fission holes diffuse smoke through water and are made with a tungsten rod while the glass is hot, creating smooth edges that reduce clogging. This downstem measures 4.5" in length.
The 14mm GRAV® Male Banger is compatible with any 14mm female joint and made of heat-tolerant quartz. Its flat dish is designed for vaporizing plant extract, and its 90° angled neck is best paired with straight-based water pipes.
The 10mm GRAV® Cup Bowl is compatible with any 10mm female joint and features a glass maria around its stem for safe handling. The cup bowl's limited capacity is designed for use with smaller water pipes and Helix™ pipes.
GRAV® joint adapters change the gender of a joint, making water pipes compatible with different accessories. This adapter changes a 14mm male joint into a 14mm female joint.
The Upline® Ash Catcher is 5" tall and made on 38mm tubing. Its ladder perc restrictions create bubbler chambers that wash and filter smoke. Its showerhead downstem diffuses smoke through water and is fixed inside the ash catcher to prevent damage. Its 45° angled arm is designed for use with a 14mm female joint on any beaker or angled-based water pipe. The Upline® Ash Catcher comes ready to use with a 14mm Octobowl and works best with approximately 2" of water.
The 14mm GRAV® Male Banger is compatible with any 14mm female joint and made of heat-tolerant quartz. Its flat dish is designed for vaporizing plant extract, and its 45° angled neck is best paired with beakers and water pipes with angled joints.
The 14mm STAX® Funnel Bowl is compatible with any 14mm female joint and features a glass maria around its stem for safe handling. The funnel bowl's substantial capacity is designed for use with the STAX® system.
The 19mm GRAV® Male Octobowl is compatible with any 19mm female joint. Its glass screen is designed to catch ash and tar and hold plant matter in place, and an arm on the side of the bowl allows for safe handling. The Octobowl's substantial capacity is designed for use with larger water pipes and upright bubblers.
The 14mm GRAV® Female Octobowl is compatible with any 14mm male joint. Its glass screen is designed to catch ash and tar and hold plant matter in place, and an arm on the side of the bowl allows for safe handling. The Octobowl's substantial capacity is designed for use with larger water pipes and upright bubblers.
The 14mm GRAV® Male Domeless Nail made of heat-tolerant quartz is compatible with any 14mm female joint. Its dish is designed for vaporizing plant extract.
GRAV® Drop Downs protect water pipes from damage due to extreme torch heat and limit the possibility of a user burning herself. Drop downs increase the distance between the accessory being torched and the body of the pipe and are easily replaced if broken. This drop down is 4" long and has both male and female 14mm joints.
The 7.5” GRAV® Rolling Tray is a durable acrylic accessory that helps keep any smoke sesh neat and tidy. It features a section of our “Find Your Higher Self” pattern which showcases iconic GRAV® pieces as well as different activities and interests a GRAV® enthusiast might enjoy.
The 14mm GRAV® Chiller Attachment is 5" tall and filled with glycerin that can reach sub-zero temperatures without freezing. Its central coil maximizes the surface area to which airflow is exposed, cooling smoke or vapor before it enters a water pipe. The chiller features 14mm male and female joints at either end, making it compatible with any 14mm water pipe and accessory.
The GRAV® J Handle Mouthpiece is 8" long and can accommodate any 14mm male joint. Each mouthpiece is paired with a 14mm plastic joint clamp and is designed to function as a dry hand pipe when paired with a bowl, a bubbler when paired with an ash catcher, and a mouthpiece when paired with a STAX® assembly or upright bubbler.
The GRAV® Ash Catcher is 5" tall and made on 38mm tubing. Its fission downstem diffuses smoke through water and can be removed for easy cleaning. Its 45° angled arm is designed for use with a 14mm female joint on any beaker or angled-based water pipe. The ash catcher comes ready to use with a 14mm funnel bowl and works best with approximately 1.5" of water.
GRAV® reduction adapters decrease the diameter of a joint, making water pipes compatible with smaller accessories. This adapter changes a 19mm female joint into a 14mm female joint.
GRAV® expansion adapters increase the diameter of a joint, making water pipes compatible with larger accessories. This adapter changes a 14mm female joint into a 19mm female joint.
The GRAV® Phoenix Ash Catcher is 5" tall and made on 38mm tubing. Ice can be added through its removable glass lid. Its 45° angled arm is designed for use with a 14mm female joint on any beaker or angled-based water pipe. The phoenix ash catcher comes ready to use with a 14mm funnel bowl and works best with approximately 1.5" of water.
The GRAV® Grinder is 1.25" tall and made on CNC aluminum. The 15 teeth and holes in its upper chamber are well-spaced to prevent clogging. Its bottom chamber features a GRAV® branded aluminum scraping tool. The edge of the tool is curved to perfectly fit the interior curve of the grinder.
The 14mm GRAV® Bubble Bowl made on clear glass is compatible with any 14mm female joint and features three evenly spaced marble grips for safe handling. The interior of the bowl is a hollow, ash-catching chamber. The bubble bowl's capacity is designed for use with mid-sized water pipes and upright bubblers.
The 19mm GRAV® Funnel Bowl is compatible with any 19mm female joint and features a glass maria around its stem for safe handling. The funnel bowl's substantial capacity is designed for use with larger water pipes and upright bubblers.
The GRAV® Ash Catcher is 5" tall and made on 38mm tubing. Its fission downstem diffuses smoke through water and can be removed for easy cleaning. Its 90° angled arm is designed for use with a 14mm female joint on any straight-based water pipe. The ash catcher comes ready to use with a 14mm funnel bowl and works best with approximately 1.5" of water.
The 14mm GRAV® Bubble Bowl made on black glass is compatible with any 14mm female joint and features three evenly spaced marble grips for safe handling. The interior of the bowl is a hollow, ash-catching chamber. The bubble bowl's capacity is designed for use with mid-sized water pipes and upright bubblers.
GRAV® joint adapters change the gender of a joint, making water pipes compatible with different accessories. This adapter changes a 14mm female joint into a 14mm male joint.
The 14mm GRAV® Bubble Bowl made on green glass is compatible with any 14mm female joint and features three evenly spaced marble grips for safe handling. The interior of the bowl is a hollow, ash-catching chamber. The bubble bowl's capacity is designed for use with mid-sized water pipes and upright bubblers.
The 19mm GRAV® Cup Bowl is compatible with any 19mm female joint and features a glass maria around its stem for safe handling. The cup bowl's limited capacity is designed for use with smaller water pipes and Helix™ pipes.
The 14mm GRAV® Bubble Bowl made on lavender glass is compatible with any 14mm female joint and features three evenly spaced marble grips for safe handling. The interior of the bowl is a hollow, ash-catching chamber. The bubble bowl's capacity is designed for use with mid-sized water pipes and upright bubblers.
The 14mm Jane West Bowl is compatible with any 14mm female joint and features a glass maria around its stem for safe handling. Its cobalt blue tubing and embellished exterior pairs best with the Jane West Beaker Water Pipe.
The GRAV® Phoenix Ash Catcher is 5" tall and made on 38mm tubing. Ice can be added through its removable glass lid. Its 90° angled arm is designed for use with a 19mm female joint on any straight-based water pipe. The phoenix ash catcher comes ready to use with a 19mm funnel bowl and works best with approximately 1.5" of water.
The 14mm GRAV® Bubble Bowl made on blue glass is compatible with any 14mm female joint and features three evenly spaced marble grips for safe handling. The interior of the bowl is a hollow, ash-catching chamber. The bubble bowl's capacity is designed for use with mid-sized water pipes and upright bubblers.
The 14mm Jane West Bowl is compatible with any 14mm female joint and features a glass maria around its stem for safe handling. Its cloud white tubing and embellished exterior pairs best with the Jane West Beaker Water Pipe.
The 14mm plastic joint clamp is made of flexible acrylic in assorted colors and is designed to secure a 14mm accessory to its joint. This pack includes ten clamps.
